SPECIFICATIONS

Brand Name: NoEnName_Null

Hign-concerned Chemical: None

Origin: Mainland China

External Testing Certification: ce

Item Type: Interior Mouldings

Material Type: carbon fiber

Type 1: Interior Mouldings

Type 2: Interior Accessories

Style: Car Interior Accessories

Fit: For Audi A4L A4 B9 2017-2019

Description
Installation Guide:
Please check the installation method before purchase: It's recommended to operate when the weather is sunny, or temperature is high, or you don't need to use the car at night.
1.Clean the edge of the wheel hub first.Clean the place to be attached,Make sure that the surface is free of dust, water, and oil. The surface of the hub don't sticky dust and the handle is also cleaned to prevent dust from sticking to the adhesive surface.
2. Use the hair dryer to heat the whole roll.Heat until the strip is soft and let it reach the wake-up effect! The effect of the heating paste is to utilize the principle of thermal expansion and contraction. After heating, the rubber surface expands and sticks, and the cooling shrinkage immediately produces a sticky force!

Note:Do not use high pressure water gun to flush and drive at too high speed within 24 hours (do not exceed 80-100 yards), all can be normal after 48 hours!

Fitment:

Fit For Audi A4 A4L B9 2017- 2019

Specifications:
Condition: 100% new

Installation Step:

1.Make sure to clean and dry the install location.

2.Carefully test fit the piece in the install location.

3.Carefully tear off the glue sticker, May use the hair dryer to warm up the adhesive tape before install.

4.Fixed position carefully, stick from one side. press firmly three minutes.

5.Don't expose to strong sunlight or water within 48 hours.

6.Because of the cold weather in winter, the adhesive will reduce the viscosity, pls try to paste in a warm house.

7.You may go to professional automotive shop for install.for install.

If you cannot find the model you are looking for, please contact us promptly,thank you !